DIY Herringbone Brick Garden Path HOW TO GUIDE

The following tutorial is courtesy of our friends over at The Home Depot - as published in their e-newsletter.

In a simple afternoon you can create a beautiful simple DIY herringbone pathway from Vintage Bricks thin brick tiles. Using old bricks creates the look that your pathway has been there forever!

Supply List:

• Measuring tape
• Vintage Bricks thin brick tiles
• Gravel paver base
• Paver sand
• Wheelbarrow
• Marking chalk or landscape paint
• Tamper or 4- x 4-inch board, approximately 3 to 4 inches long
• Flat-headed shovel
• Broom

Step 1: Measure the length and width of your desired garden path to determine how many Vintage Bricks salvaged tiles you will need. Add 2 inches to your length to find the amount of gravel and sand you will need.
Step 2: Dig a 4-5" deep trench along your desired path, adding 2 inches to the width. Square the sides with a flat shovel.

Step 3: Spread your gravel 1-2" deep along the path, tamp down the gravel

Step 4: Repeat Step 3 with sand
Step 5: Lay your Vintage Bricks thin brick tiles in a herringbone pattern, adding and removing sand to keep brick tiles even. Tap bricks into sand with a 4x4" piece of wood

Step 6: Pour sand over bricks fill the gaps

Step 7: Fill in edges around the bricks with dirt and pieces of grass to create a natural look

Step 8: Clean up any excess sand and enjoy your beautiful new old pathway.

www.VintageBricks.com for 100% eco-friendly authentic old bricks cut into thin brick tiles. Brick tiles delivered to your door!